Expert Poly B Replacement Burnaby, BC

Yes. In British Columbia, poly B has been flagged as a high-risk material by virtually every major home insurer — meaning you either replace it on your schedule, or your insurer forces the issue on theirs. Beyond insurance, the material has a well-documented failure mode: chlorine in municipal water gradually embrittles the pipe walls from the inside out, and the acetal plastic fittings are prone to sudden cracking once they've aged. There's no reliable way to inspect poly B for internal deterioration without cutting it open. If your Burnaby home was built between 1978 and 1995, the pipe is now 30 to 50 years old, well past the point where most plumbing engineers consider it low-risk. The question isn't really whether to replace it. It's whether that happens on your timeline or after a flood.

Polybutylene pipe was never banned through a single piece of legislation in Canada — it quietly lost its approval in provincial plumbing codes through the late 1990s and early 2000s. The turning point came in the United States, where a $950 million class action settlement in 1995 (Cox v. Shell Oil Co.) effectively ended North American production of polybutylene pipe and fittings. Canadian manufacturers followed as the material was removed from approved-materials lists. The National Plumbing Code of Canada no longer listed polybutylene as an approved supply material by the time of its 2005 edition, and most provincial codes — including BC's — had already removed it before that. So while there's no single ban date, new poly B installations have been code non-compliant in British Columbia since the late 1990s.

Legally, yes — but you'll pay for it in one form or another. In British Columbia, sellers are required to disclose known material defects, and poly B's documented failure history almost certainly qualifies. Expect any buyer's home inspector to flag it. From there, buyers typically do one of three things: request a price reduction to cover replacement, make replacement a condition of the sale, or walk away when their insurer or lender won't cover the property. Buyers financing the purchase often find that their mortgage lender's insurance requirements include poly B replacement before funding is released. Replacing poly B before listing removes that leverage from buyers entirely, can speed up the sale, and lets you control the cost rather than negotiate it under pressure. In the current Burnaby market, a properly documented poly B replacement is a genuine selling advantage.

PEX-A (cross-linked polyethylene) is the most widely used replacement material in Burnaby and across Metro Vancouver. It's flexible, highly resistant to freezing, approved by all major BC insurance providers, and its expansion-style fittings create joints that are actually stronger than the pipe itself. Copper is the other proven choice — used in residential plumbing for over a century, universally accepted by insurers and inspectors, and the preferred option in some higher-end or exposed-piping applications. For most Burnaby homes, PEX-A is the practical recommendation because of its flexibility when routing through existing wall cavities during a repipe. Copper makes more sense in specific configurations or where long-term aesthetics matter. PEX-B is a third code-compliant, insurer-accepted option in BC, though it's less flexible than PEX-A and uses a different fitting system. We'll recommend the right material for your specific home and budget when we do the inspection.

Poly B (polybutylene) is a grey plastic piping material installed in approximately 700,000 Canadian homes built between 1978 and 1995. It was widely used in Burnaby and throughout Metro Vancouver during this era. Over time, the material degrades when exposed to chlorine in municipal water, causing the pipe walls to become brittle and prone to cracking, pinhole leaks, and sudden bursts. Most home insurers in BC now require poly B replacement as a condition of coverage — or charge significantly higher premiums if it remains in place.

Poly B pipe is typically grey or occasionally black, with a dull, plastic appearance. It connects to grey, white, or copper fittings and is often labelled 'PB' followed by a four-digit number on the pipe itself. Common locations include the utility room, under sinks, behind toilets, and in crawl spaces. If your home was built in Burnaby or Metro Vancouver between 1978 and 1995, there's a strong chance it has poly b piping. The only way to know for certain is a professional poly b inspection.

In British Columbia, most major home insurance providers have taken a hard line on poly b plumbing. Some insurers will cancel your policy at renewal if poly b is present; others will add a costly endorsement or exclusion for water damage from poly b failures. We frequently work with homeowners who've received letters from their insurer giving them a deadline to replace the poly b and provide documentation. Getting the work done promptly — and documented correctly — protects your coverage.

A typical single-family home in Burnaby takes one to three days to fully repipe, depending on the size of the home and the complexity of the layout. Strata units and condos are generally faster, often completed in a single day. We work efficiently to minimize disruption, and we'll give you a clear timeline before any work begins.